JB’s Home Energy LLC Unclaimed

Provides Accurate Energy Efficiency Ratings for New Homes and Renovations.

Enhances HVAC efficiency while preventing energy loss and improving indoor air quality.

Ensure Energy Code Compliance And Improve Home Comfort.

Enhance HVAC performance while ensuring code compliance and eligibility for energy rebates.

Minimize energy loss and enhance indoor comfort through expert air sealing solutions.

Ensure proper insulation installation, enhance energy efficiency, and support rebate eligibility.

Ensure HVAC systems are properly sized for code compliance and efficiency.

Optimizes building energy efficiency and code compliance with detailed modeling and reports.

Maximize your energy rebates and streamline the application process with expert guidance.

Access Valuable Rebates And Incentives For Energy-Efficient Upgrades.

Services that identify, quantify, and remediate building envelope air leakage to meet energy codes, improve comfort and indoor air quality, and enable rebate eligibility.

Services that diagnose and fix duct leakage and HVAC distribution issues to improve system efficiency, airflow, and code compliance.

Analysis and modeling services (IECC/HERS-compliant) used to demonstrate code compliance, optimize design, and verify projected energy performance for permits and certifications.

Consulting and documentation services that maximize access to utility and state incentives, prepare rebate applications, and coordinate program-specific requirements (e.g., Mass Save).

HERS Ratings

HERS Ratings measure energy efficiency on a standard scale for new residential builds or renovations. The service verifies code compliance (IECC and stretch codes), unlocks rebates and utility incentives, optimizes HVAC performance, identifies energy loss early, and boosts comfort, efficiency, and air quality.

• Ensures Code Compliance
  HERS Ratings confirm compliance with important energy codes, facilitating building approvals.
• Enhances Comfort and Air Quality
  This service improves indoor comfort through better energy management and air quality assessments.
• Detects Energy Loss
  Early identification of potential energy loss ensures quicker resolutions and cost savings.
• Optimizes HVAC Systems
  Enhances the efficiency and performance of HVAC systems, reducing operational costs.
• Unlocks Financial Incentives
  Serves as a pathway for homeowners and builders to access various utility rebate programs.

Duct-EZ HVAC Sealing

Duct-EZ HVAC Sealing seals the ductwork from the inside to stop leaks, improving heating, cooling, and overall comfort, addressing air quality and humidity, ensuring passing duct leakage tests for code compliance, and helping maximize utility rebates.

• Meets Energy Code Standards
  Helps to ensure the system meets local code requirements, facilitating smoother inspections.
• Reduces Energy Waste
  Sealing ducts prevents substantial energy loss, helping homeowners save on utility bills.
• Enhances System Performance
  Improving the overall efficiency of the HVAC system ensures better comfort and reduced energy costs.
• Enhances Indoor Air Quality
  Addresses issues related to indoor air pollutants and humidity, contributing to a healthier living environment.
• Maximizes Utility Incentives
  Guidance on available utility rebates can significantly reduce project costs while promoting energy efficiency.

Blower Door Testing

Blower Door Testing provides certified testing for new and existing residential properties to measure building envelope airtightness, ensuring energy code compliance, identifying air leaks, verifying insulation/sealing performance, and improving comfort and indoor air quality; required for code compliance.

• Meets Code Standards
  The testing is necessary to confirm that a building meets all relevant energy codes before final inspections.
• Verifies Regulatory Standards
  Confirm compliance with national and local energy codes, essential for passing final inspections.
• Validates Thermal Integrity
  Confirms the effectiveness of insulation, which is crucial for energy conservation.
• Identifies Energy Loss Sources
  Effective in uncovering hidden air leaks that contribute to higher energy costs.
• Enhances Indoor Environment
  By identifying leakage, the service helps optimize HVAC efficiency and improves the overall living conditions.

Duct Blaster Testing

Duct leakage testing identifies duct leaks with pressurization; performed with blower tests; ensures code compliance and may enable rebates; improves HVAC performance and reduces energy bills.

• Meet Code Standards
  Passing the duct leakage test is essential for adhering to local and national building codes.
• Minimize Energy Costs
  Sealing duct leaks leads to measurable reductions in energy consumption and utility bills.
• Improve System Efficiency
  Better sealing leads to more efficient heating and cooling, extending system life and enhancing comfort.
• Enhance Airflow
  This service ensures optimal airflow in the HVAC system, contributing to better indoor comfort and air quality.
• Access Incentives
  Completing this testing may allow clients to qualify for various utility rebate programs, maximizing financial returns.

Air Infiltration Sealing

Air Infiltration Sealing identifies and seals gaps and cracks in a building envelope to reduce energy loss; reduces drafts, improves energy efficiency, and helps meet IECC code compliance. It uses blower door testing to target infiltration points, and is often done before drywall to facilitate rebate eligibility.

• Guarantee Passed Tests
  Ensures your building meets essential energy efficiency standards.
• Prevent Energy Waste
  Significantly cuts down unnecessary energy expenditures.
• Target Multiple Infiltration Points
  Addresses various infiltration points for thorough insulation.
• Enhance Indoor Comfort
  Creates a more pleasant living environment by minimizing drafts.
• Save Money Over Time
  Experience reduced utility costs for lasting financial benefits.
• Access Financial Incentives
  Increases chances of qualifying for rebates with compliance.

Insulation Inspections

Insulation Inspections verify insulation is properly installed before drywall, ensuring a continuous thermal barrier and meeting energy code requirements. Pre-drywall checks catch insulation gaps, reduce drafts and rework, lower energy bills and improve comfort, and help qualify for rebate eligibility.

• Prevent Drafts And Rework
  Identifying insulation issues before drywall installation saves time and ensures better long-term performance.
• Improve Long-Term Energy Efficiency
  Proper insulation installation reduces overall energy consumption, leading to lower utility bills.
• Ensure Code Compliance
  These inspections confirm that the insulation installed is sufficient and effectively meets building codes.
• Verify Continuous Thermal Barriers
  This verification is critical for maximizing energy savings and achieving compliance.
• Qualify For Rebates
  Inspections facilitate access to financial incentives for energy-efficient practices.

Manual JDS HVAC Calculations

Manual JDS HVAC Calculations deliver precise Manual J, D, and S reports to size, design, and select HVAC equipment. They are required for energy code approval and ensure efficient system performance.

• Receive Code-Compliant Sizing.
  Ensure your HVAC system complies with state energy codes, preventing costly rework and delays.
• Achieve Permit Readiness.
  Ensure all necessary documentation is in place for permit applications and compliance.
• Optimize Duct Design.
  Receive guidance on duct layouts that maximize airflow and system efficiency.
• Choose Appropriate Equipment.
  Identify and select HVAC equipment that aligns with your specific load requirements.
• Prevent Equipment Oversizing.
  Prevent comfort issues caused by oversized systems via accurate load calculations.

Energy Calculations / Modeling

Energy Calculations / Modeling provides detailed energy modeling and IECC-compliant reports for builders, analyzing energy performance to support local permits and rebates, ensuring compliance with energy codes and optimizing building designs for efficiency.

• Facilitates Certification Qualification
  Provides essential documentation required for various energy certifications, enhancing your project's marketability.
• Ensures Compliance
  Delivers reports that meet the International Energy Conservation Code, helping you pass inspections and avoid delays.
• Enhances System Efficiency
  Utilizes energy modeling to suggest design changes that improve efficiency and reduce energy consumption.
• Verifies Energy Performance
  Identifies potential inefficiencies in your design, allowing for corrections before construction begins.
• Maximizes Financial Incentives
  Assists you in navigating rebate programs, ensuring you capitalize on available financial incentives.

Rebate Consultation

Rebate Consultation helps homeowners and builders navigate rebates by providing documentation and guidance; bundling with other JB’s Home Energy services can maximize rebates; includes knowledge for Mass Save and other programs.

• Expert Guidance
  Navigate through rebate programs with knowledgeable support for optimal results.
• Maximize Savings
  Bundling services enhances rebate opportunities and overall savings.
• Documentation Support
  Comprehensive documentation ensures compliance and eligibility for rebates.
• Streamline Process
  Efficiently manage documentation to ease the rebate application process.
• Accelerate Approvals
  Expert assistance to expedite approval processes for rebates.

Mass Save Program

The Mass Save® Program offers Massachusetts builders and homeowners rebates, incentives, and expert guidance for energy-efficient upgrades, helping meet state codes, cut costs, and improve building performance. JB’s Home Energy assists with rebate applications, ensuring compliance with energy standards.

• Receive Financial Incentives
  Utilize utility-funded rebates for insulation, HVAC systems, air sealing, and more, significantly reducing the cost of energy-efficient upgrades.
• Facilitate Quick Inspections
  Ensure all necessary documentation is prepared for efficient local building inspections, expediting the rebate process.
• Ensure Compliance With State Codes
  Get assistance to ensure that all energy-efficient upgrades meet Massachusetts energy code requirements.
• Reduce Utility Bills
  Achieve significant reductions in energy costs over time by implementing energy-efficient upgrades.
• Streamline Rebate Process
  Receive expert help to navigate the complexities of the Mass Save® Program and other related incentives.